Products /
Industrial Doors /
Rolling Steel Doors /
Standard Service Doors /
Rolling Steel Doors: HIgh Quality
Rolling Steel Doors: HIgh Quality
Rolling steel door is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow to be adapted to any environment.
Door Options
- Electric operator or crank operation
- Bottom sensing edge
- Galvanized steel bottom bar angles and guides
- Sloping bottom bar
- Between-jambs mounting
- Stainless steel or aluminum slats
- High-usage package
- High-wind load (FBC, TDI, DADE)
- Cylinder lock
- Exhaust ports
- Flat slat profile (F-265)
- C-600 heavy duty 6" curved slat profile
- Perforated 18 ga. steel slats with 1/16" (2 mm) diameter holes on 1/16" (2 mm) centers
- Fenestrated 18 ga. steel slats with uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) on C-275 or F265 slat profiles
- Fenestrated 18 ga. steel slats with uniformly spaced openings of 1" x 10" (25.4 mm x 254 mm) on F265 slat profile
- Powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
- Special application doors:
- Oversized doors to 1500 sq. ft. (139.4 sq. m)
- Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
- Spark-resistant doors, craneway doors, pass doors
Standard max width
30'4" (9246 mm)
Standard max height
28'4" (8636 mm)
Curtain
16 ga. galvanized steel up to 30'4" (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30'4" (9246 mm) width*
20 ga. galvanized steel up to 25'4" (7722 mm) width*
22 ga. galvanized steel up to 18'4" (5588 mm) width*
24 ga. galvanized steel up to 15'4" (4674 mm) width*
* not all slat profiles
Finish
Gray, tan, white or brown
Hood
24 ga. galvanized steel
Wind load
20 psf
Standard mounting
Face of wall
Operation
Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Standard springs
20,000 cycle
Weatherseals
Bottom bar astragal
Guides
Three structural steel angles PowderGuard® weathered finish with black powder coat
Bottom bar
Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)
Lock
Interior slide bolt on push-up
Padlockable chain keeper on chain hoist
Warranty
24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together)
Fenestration

Curved slat with 3" x 5/8" fenestration

F265 slat with 10" x 1" fenestration
Slat profile
STANDARD - CURVED
C-187 is standard up to 15'4" (4877 mm) wide in 22 Gauge. Other gauge options available.

C-275 is option up to 15'4" and standard for doors over 15'4" wide (4877 mm). Gauge dependent on opening width. Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm).
Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

OPTION – FLAT
F-265 available up to 30’4” (9246 mm) wide in 18 gauge. Other gauges available. Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) or 1" x 10" (mm x mm). Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.
F-265E – 14 gauge extruded aluminum solid slat available up to 20’4” (6198 mm) width.
Perforation or fenestration not available on model 610 on F265E.

C-600 - For special applications requiring herculean size and strength, consider the 610 Series door with C-600 slats. This non-insulated, oversized door fits openings up to a maximum 1500 square feet (139.4 m2.), in widths up to 70' (21,336 mm) and heights up to 30'4" (9246 mm). The curtain is crafted with 6" x 1 3/8" (152 mm x 35 mm) curved, 18, 16 or 14-gauge steel slats for unparalleled strength and durability. No perforation or fenestration on model 610 on C-600.